USED - VERY CLEAN $2999.00, With Only 344.9 Hours
1 used - 6" by 25' ducting
2 brand-new - 6" by 25' ducting
1 ducting collar
1 set of extra-large zip ties
-116 pints water removal per day at AHAM (80°F/60% Rh)
-460 CFM (385 process/75 reactivation)
-2 circuits, 115VAC, 11 amps each
-True 4-hole design
-Can be operated vertically and horizontally
The Phoenix D385 is a compact desiccant dehumidifier that provides restoration contractors with the lowest grains possible for ultra dry dehumidification.
It competes with large-capacity dehus and pulls 116 pints at AHAM (80°/60%RH).
It's compact size fits easily on your truck and stores nicely in your warehouse or storage area. Plus, for jobs with tight spaces, such as crawlspaces or attics, the D385 is ideal.
This unit can be run both vertically or horizontally, so you can maneuver it into tight spaces and get efficient operation no matter how it's set up.
The D385 produces 385 CFM, enough drying power to dry up to 1,000 square feet of space with a single unit!
Best of all, the D385 works of a standard 115V circuit. It comes with two power cords that connect to two separate outlets, each drawing just 11 amps of power.
The Phoenix D385 has a four-hole design. Air comes in through the top and is exhausted out the side. The unit is ductable, with multiple options including Lay-Flat ducting, so you can set up different types of pressure, including neutral, negative, and positive (depending on the scope of the job).
The re-activation air stream is ducted through 6" flex duct provided with the unit and stores conveniently in the top of the unit.
Operates vertically or horizontally
Wide operating range
Process airflow 385 CFM
Reactivation airflow 75 CFM
116 pints water removal at AHAMRead More...
* Seller assumes all responsibility for listing above.